Click here to view on YouTube
Transcript for the Maintenance Mats Video
The following information is being provided as a guide to assist the purchaser in the safe operation of the Accumax Global Maintenance Mats. As hazards, risks and requirements may vary ‘from site to site’ the end-user must follow the risk management process to ensure safe operation of the maintenance mats prior to use. Always remember to apply safety locks before commencing work on any machinery.
Our maintenance mats come in two options, one piece or two piece splits. The mats are made from a durable material which is fitted with slip-resistant plates. The mat is secured to the track using the high quality straps provided.
Fitting the Maintenance Mats
Firstly, prepare by placing the straps over the top of the mat. Note that one end of the mat has an angle plate. Lift the mat onto the track. The angle plate must be placed on the highest section of the track and up against the grouser bar to prevent the mat from slipping downwards.
Pass the straps down the back of the track. Grab the strap, clip them together then tighten. Once all three straps are tied, check that the mat is stable and secure. The fitment is now complete.
Fitting the Split Maintenance Mat
Fitting the split mat is much the same, except start with the mat folded. Lift the mat onto the track and unfold it. Then follow the same fitting instructions as we have just mentioned. To remove the mats, simply follow the same process as fitting but in reverse. Loosen the straps, unclip the connectors, then lift the mat down. Once finished, remember to remove your lockout keys.